Products

  • 0
  • 0

Global Prestressed Concrete market trend 2023-2028 What is Prestressed Concrete by Newsseriesnow

Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this year, more than 4 million people in the United States have voluntarily resigned each month. In August, the number of resignations exceeded 4.27 million, and in November, it rose to 4.4 million. The operation of society is linked. The large number of departures in the United States has led to a large shortage of labor; and the shortage of a large number of labor has directly led to the supply chain crisis in the United States; the supply chain crisis has directly affected prices and prices in the United States. The economy has a direct effect on people's lives.
The economic downturn will affect the market demand for Prestressed Concrete.

What is Prestressed Concrete?

Prestressed Concrete is a kind of concrete component mainly used in construction engineering and bridge engineering.

To avoid premature cracks in reinforced concrete structures, make full use of high-strength steel bars and high-strength Concrete, and try to reduce the tensile stress generated by the components by applying external forces before the concrete structures or components are subject to the service load, even in a state of compressive stress. Concrete elements are below.


How Prestressed Concrete Works

The pre-compression stress is used to reduce or offset the tensile stress of Concrete caused by the load, to control the tensile stress of the structural components to a small range, even in a compressed state, to delay the appearance and development of concrete cracks, thereby improving the resistance of the components. Crack performance and stiffness.

11

Advantages of Prestressed Concrete

1. Good crack resistance and high rigidity. Due to the prestressing of the components, the appearance of cracks is significantly delayed. Under the action of the load, the components may not appear to crack, or the cracks may be delayed, so the stiffness of the components is improved, and the durability of the structure is increased.

2. Save materials and reduce self-weight. Because its structure must use high-strength materials, it can reduce the number of steel bars and the section size of components, save steel and Concrete, and reduce the self-weight of the structure, which has obvious advantages for large-span heavy-load structures.

3. It can reduce the vertical shear force and primary tensile stress of concrete beams. The curved reinforcement (bundle) of the prestressed concrete beam can reduce the vertical shear force near the support in the beam. Because of the existence of prestress on the concrete section, the principal tensile stress under the load is also reduced. This is beneficial to reduce the web thickness of the beam so that the self-weight of the prestressed concrete beam can be further reduced.

4. Improve the stability of compression components. When the compression member is relatively long and slender, it is easy to be bent after receiving a certain pressure, resulting in loss of stability and destruction. If prestressing is applied to the reinforced concrete column so that the longitudinally stressed steel bars are tensioned very tightly, not only the prestressed steel bars themselves are not easy to bend, but they also can help the surrounding Concrete to improve the ability to resist bending.

5. Improve the fatigue resistance of components. Because the rebar with strong prestress has relatively small changes in stress caused by loading or unloading during the use stage. It can improve fatigue strength, which is very beneficial for structures that bear dynamic loads.

6. Prestress can be used as a means of connecting structural components to promote the development of new systems and construction methods for large-span structures


Some requirements for prestressed steel bars:

(1) The strength should be high. The tensile stress of prestressed steel bars will cause various stress losses during the entire fabrication and use of components. The sum of these losses can sometimes reach more than 200N/mm² if the strength of the steel bar used is not high, the stress established during tension will even be lost.

(2) It must have good adhesion with Concrete. Especially in the pretensioning method, there must be a high bond self-anchoring strength between the prestressed steel bar and the Concrete. For some high-strength smooth steel wire, it is necessary to go through "scoring," "pressure wave," or "kink" so that it can form scored steel wire, corrugated steel wire, and kinked steel wire to increase the bonding force.

(3) There must be sufficient plasticity and good processing properties. The higher the strength of the steel, the lower its plasticity. When the plasticity of the steel bar is too low, especially under low temperature and impact loading conditions, a brittle fracture may occur. Good workability means that the welding performance is good. When the upsetting head anchor plate is used, the upsetting of the steel bar head does not affect the original mechanical properties, etc.

TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


If you are looking for high quality concrete additives, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com


Inflationary pressures on Canadians continue to rise. The consumer-price index rose 6.7% in March from a year earlier, the biggest increase since January 1991, according to the latest figures from Statistics Canada.  

On a month-on-month basis, Canada's CPI rose 1.4 percent in March, also accelerating from February's 1.0 percent rise.  

Prices in the eight major sectors covered by the statistics continued to rise. The uptrend comes against the backdrop of continued price pressures in the Canadian housing market, widespread supply chain constraints, and geopolitical conflicts, according to CBC. A variety of factors have affected energy, commodity, and agricultural markets. Meanwhile, Canada's employment picture continued to improve in March, with the unemployment rate falling to a record low and the average hourly earnings of employees rising.  

Excluding gasoline, Canada's CPI rose 5.5 percent year on year in March.  It is also the highest since comparable data began in 1999.  

The widespread supply chain constraints and geopolitical conflicts are expected to continue to affect the prices of the Prestressed Concrete.

Inquery us

Our Latest Products

Global graphene powder market trend 2024-2026 Researchers Developed Graphene-based Foam Composites For Efficient Water Filtration by Newsseriesnow

Russia and Ukraine is an important exporters of oil, natural gas, metals, fertilizers, rare gases and other industrial raw materials. Affected by the further intensification of the tension of the war, the global market has become more worried about t…

Global MnO2 powder market trend 2024-2029 What is Manganese Dioxide MnO2 Used For? by Newsseriesnow

As the world deals with potential supply shortages, oil prices are soaring again, with more dramatic spikes and sudden drops expected.For consumers, that means more expensive gas for longer - prices at the pump remain above $4 a gallon. For the econo…

Global silicon carbide powder market trend 2023-2028 What can Silicon Carbide Devices Bring to New Energy Vehicles? by Newsseriesnow

According to statistics from China Chemical and Physical Power Supply Industry Association, China's export volume and export value of lithium-ion batteries have continued to increase. In 2021, China's exports of lithium-ion batteries were 3.428 billi…